HICLOVER TS-30D PLC Incinerator (Former YD-30 PLC): Intelligent Small-Scale Waste Incineration Solution

HICLOVER TS-30D PLC Incinerator (Former YD-30 PLC): Intelligent Small-Scale Waste Incineration Solution

The HICLOVER TS-30D PLC incinerator, previously known as YD-30 PLC, is a compact, fully automatic waste incineration system designed for facilities that require stable high-temperature destruction, operator safety, and fuel-efficient operation. With a nominal burn rate of 30 kg per hour, the TS-30D PLC is optimized for medical, laboratory, small industrial, and institutional waste disposal where compliance, reliability, and controlled emissions are critical.

Built on HICLOVER’s long-established incinerator design philosophy, the TS-30D PLC combines traditional refractory engineering with modern PLC automation, ensuring consistent performance under continuous operation.

Designed for Controlled and Safe Waste Destruction

The TS-30D PLC adopts a dual-chamber high-temperature configuration with adjustable high-temperature retention (HTR). The system ensures complete oxidation of waste and flue gases while minimizing operator exposure and environmental risks.

• Average burn rate: 30 kg/hour

• Feed mode: Manual feeding with intelligent operator protection

• Continuous operation logic supported by PLC automation

• Automatic burner ignition and shutdown

The intelligent sensor system enables continuous feeding logic while preventing unsafe access during operation, reinforcing worker protection standards.

Dual-Chamber High-Temperature Combustion System

Primary Combustion Chamber

• Volume: 330 L

• Internal dimensions: 75 × 75 × 60 cm

• Operating temperature: 800 ℃ – 1000 ℃

• Hot face refractory:

  • Thickness ≥ 115 mm

  • ≥ 65 % Al₂O₃

  • 1750 ℃ grade

• Cold face insulation: High-grade refractory ceramic fiber

Secondary Combustion Chamber

• Volume: 180 L

• Operating temperature: 1000 ℃ – 1300 ℃

• Gas residence time: ≥ 2.0 seconds

• Mix combustion chamber ensures uniform gas turbulence and complete oxidation

This configuration is suitable for pathological waste, infectious materials, pharmaceutical residues, and small-volume hazardous waste.

PLC Automatic Control and Intelligent Monitoring

The TS-30D PLC is equipped with a PLC automatic control system with LCD interface, enabling precise control, monitoring, and diagnostics.

Key control features include:

• Real-time temperature monitoring with corundum probe tube (rated up to 1400 ℃)

• Progress display bar and time visualization

• Programmable time settings

• System self-testing mode

• Automatic false alarm detection

• Automatic protection operator (APO) logic

• Automatic cooling cycle after shutdown

The PLC system reduces dependence on operator experience and improves long-term operational stability.

Fuel Efficiency and Burner Configuration

The TS-30D PLC is designed with intelligent fuel-saving logic, optimizing burner operation based on chamber temperature feedback.

• Burner type: Italy brand

• Fuel options:

  • Diesel oil (standard)

  • Natural gas (optional configuration)

• Diesel consumption: ~10 kg/hour

• Burner operation: Fully automatic ON/OFF

This approach balances combustion stability, fuel economy, and equipment longevity.

Integrated Flue Gas Treatment Options

To meet diverse environmental requirements, the TS-30D PLC includes a dry smoke filter chamber as standard.

• Dry scrubber: Included

• Wet scrubber: Optional (site-specific emission control)

• Chimney height: 5 meters

• Chimney material: Stainless Steel 304

This modular approach allows adaptation to local emission standards without over-engineering.

Mechanical Structure and Feeding Options

• Feeding door options:

  • Side / front loading: 55 × 50 cm

  • Top loading (optional): 75 × 75 cm

• External dimensions (main body): 175 × 120 × 140 cm

• Gross weight: ~3500 kg

• Sealing material: Refractory ceramic fiber

• Exterior paint: 250 ℃ high-temperature resistant coating

An upgrade to containerized mobile type is available for remote or temporary installations.

Electrical and Utility Requirements

• Voltage: 220 V

• Installed power: 0.7 kW

• Oil tank capacity: 200 L

• Oil tank stand: Included

• Liquid level display: Standard

Low electrical demand makes the TS-30D PLC suitable for areas with limited infrastructure.

Certifications and Compliance

The TS-30D PLC is manufactured under certified quality and compliance systems:

• CE certification:

  • 2006/42/EC

  • 2014/30/EU

• ISO certification: ISO 9001:2015

• High-Tech Enterprise Certification: Yes

These certifications support international procurement, institutional buyers, and regulated markets.

Typical Application Scenarios

The HICLOVER TS-30D PLC incinerator is well suited for:

• Hospitals and clinics

• Laboratories and research centers

• Veterinary facilities

• Quarantine stations

• Small industrial waste treatment points

• Remote or decentralized waste management sites

Its balance of traditional refractory durability and forward-looking PLC automation makes it a dependable long-term asset.

www.hiclover.com

The HICLOVER TS-30D PLC incinerator represents a refined evolution of the YD-30 PLC platform, offering stable high-temperature combustion, intelligent control, and flexible emission treatment in a compact footprint. It is a practical solution for facilities seeking reliable small-scale incineration with modern safety and efficiency standards.

For technical inquiries or configuration options, visit www.hiclover.com or contact [email protected].