Medical Incinerator Model TS10

Considering Environmental Protection requirements and rules, almost all incinerator have secondary combustion chamber (after-burn, post-combustion), even if third combustion chamber. The secondary burner burn the Exhaust gas from primary combustion chamber, this technology make sure sufficient combustion, few black smoke and smell.

Product Description

The main body is one combustion chamber (at least), Refractory line or firebrick, Insulation materials and the outer plate. Ignition element is external oil or gas burner. The burner can be running until waste burnout but for some waste like plastic, paper (sometime, mix coal with waste before feeding), they can combustion itself after Ignition. During combustion, burner has a fan itself for Oxygen supply and also protect burner avoid heat damage from combustion chamber. And, there a external fan blow air into combustion chamber. The Exhaust gas blow out after combustion.

Items/Model TS10(PLC) TS20(PLC)
Burn Rate 10 kg/hour 20 kg/hour
Feed Capacity 20kg 40kg
Control Mode PLC PLC
Combustion Chamber 100L 210L
Internal Dimensions 50x50x40cm 65x65x50cm
Secondary Chamber 50L 110L
Smoke Filter Chamber Yes Yes
Feed Mode Manual Manual
Voltage 220V 220V
Power 0.5Kw 0.5Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3
Gas Consumption (m3/hour) 6.2–11.4 8–15.7
Temperature Monitor Yes Yes
Temperature Protection Yes Yes
Oil Tank 100L 100L
Feed Door 30x30cm 45x40cm
Chimney 3Meter 3Meter
Chimney Type Stainless Steel Stainless Steel
1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃
Residency Time 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg
External Dimensions 140x90x120cm 160x110x130cm