Low-Temperature Controlled Incineration Solutions for Electronics Manufacturing and Battery Recycling Facilities The rapid expansion of the […]
Strengthening Immunization Waste Management in Afghanistan with HICLOVER TS50 PLC Incinerators Addressing UNICEF’s Requirements for Safe […]
HICLOVER Incinerator Model YD600 with heat recovery 600-800kgs per hour capacity
The logistics of waste disposal become particularly challenging when operations are mobile or in areas with […]
The chamber should be insulated and refractory lined with high temperature and heat resistant material. Should be fitted with burners that use low sulphur fuel.Auxiliary air supply should be controlled.Ensure residence time is not less than two seconds.Ensure that the gas temperature as measured against the inside wall in the secondary chamber and not in the flame zone is not less than 1100 degrees centigrade.Ensure the emitted oxygen content of the emitted gases is not less than 11%Ensure both primary and secondary combustion temperatures are maintained until all waste is completely combusted.Heat input from the afterburner should be controlled automatically by the programmable digital control system, such that in the event of temperatures in excess of 950°C – 1,050°C being transferred from the primary chamber the afterburner will switch off to conserve fuel.Provide 2 burners- 1 diesel fired packaged primary burner and a single secondary afterburner.The burners should be temperature controlled to conserve fuel and attain optimum combustion.Factory waste disposal packed unit dim 1850mm*2000mm*2500mm incinerator capable of burning a guaranteed 50 kg/hr of office waste efficiently without the emission of fly ash, dour and smoke-Refuse ignition burner– After burner-Air fans-Refractory lined steel shell with integrated ducts Primary combustion chamber with a capacity of 1 cubic meters.Stainless steel chimney > 6 meters.Burn rate (rate of waste incineration) -at least 50 kg per hourShould have a full width counterbalance loading door allowing easy access to the main chamber for loading and removing ash.1 off diesel-fired ignition burner C temperature controlled1 off combustion air supply fan and distribution systemHigh capacity secondary combustion chamber 2.0 @ >1050oC1 off diesel-fired afterburner C temperature controlled
Egypt Waste & Medical Waste Incinerator Market Report Strategic Review Across Cairo, Giza, Alexandria, Suez, Port […]
Crematorium Incinerator: A Reliable Solution for Efficient and Respectful Cremation The process of cremation has become […]
Trailer-Mounted Incinerator: Mobility, Efficiency, and Environmental Innovation In today’s fast-evolving waste management landscape, mobility and efficiency […]
Large Capacity Solid Waste Incinerators for Municipal Waste Management: Transforming Urban Sustainability with HICLOVER Municipal waste […]