Burning Rate: 50kgs/hr
Feed Capacity: 150kgs
Primary Combustion Chamber: 900 litres
Secondary Combustion Chamber: 300 litres
Mix Combustion Chamber: Yes
Smoke Filter Chamber: Yes
Feed Mode: Manual
Fuel Type: Diesel Oil/ Natural Gas/LPG
Internal Dimensions: 120 x 90 x 85cm (primary chamber)
External Dimensions: 200 x 160 x 310cm (without chimney)
Burning Efficiency: >98%
Capacity: 50kg/hour 50-100kgs/hour
Low speed low noise Yes
Blades are abrasion resistant graded steel- duly heat treated Yes
Charging door and waste removal doors are easy operable complete with door opening safety mechanism thus preventing any aerosol escaping Yes
Provided with PLC Panel and emergency stop switch Electric Control
Branded Stainless Steel/ Powder coated metal Electric Needle and Syringe Destroyer, (220/240 V, 50 Hz) Plastic outer covering. 220V±10%
Type of Electrodes used: Copper with silver plated.
Destruction Rate in, seconds/Needle: 2 to 3 seconds per needle depending on the size of the needle. 1 to 3 seconds per needle depending on the size of the needle.
Thickness & Length of Needle Recommended : Dia. 0.4 mm to 1.0 mm, Length 12.5mm to 80mm. Yes
Tray Capacity No. of syringes & Needles: 200 Nos. of destroyed syringe hubs and needle SWRF can be collected in drawer. Tray Capacity No. of syringes & Needles: 50 Nos.
Safety Features, provided: Cartridge glass fuse of 2 Amps capacity is provided. Overheating protection temperature: 95℃
Quantity: 1,800 red pes, 1,800 blue pes and 1,800 yellow pes
Plastic Bags of HDPL, LLPE, DP should be biodegradable not reused plastic, bags should be superior quality of thickness of 50 micron or more thickness, non chlorinated plastic.
Bags should be Autoclavble & Puncture proof
Should not emit thick Black smoke in incinerator
Should burn without leaving traces into ashes.