We are looking for MEDICAL WASTE INCINERATOR, hazardous waste incinerators,laboratory incinerator, medical waste incinerators manufacturers, 100 kg/hr. If you have the same, please send us your best offer with full specification.
We received the pictures for the burner fuel installation. The pictures show the fuel lines up to the burners covers but not the actual
proper hookup for inlet and outlet fuels. We need the actual inlet and outlet ports for the Suntec, 21600 Longvic Fuel pump identified in
each of the incinerator burners.2 Oil burners
2 temperature thermocouples
5 meters of thermal gasket
Please quote for the 220kg/hr incinerator with the following dimensions
– Width : 2450 mm
– Length: 2840 mm
– Height : 2710 mm
We’re doing an investigation concerning incinerator machines for approximately 2 tons of MSW per day. We would like to ask about the size
of the machine, its initial cost, the cost of the sources of energy needed to function, its maintenance cost per year and its salvage
value.We would like to market your products by providing the specs and cost for a 100 to 130 Kg incinerator to our customer by Monday.
Capacity: 1500 t/d ; 3 combustion lines, each having a capacity of 500t/d
Land coverage: around 52,000 m2 with air cooling (coverage can be lower with water cooling).
Substation voltage: no less than 33kv, above 110kv preferred; substation closeness preferred
Fuel: Gas or diesel required for ignition.We are an engineering company that located in north of Iran.also we have an office in Iraq.
We need a general incinerator with 2 tons per hour capacity.used in a hospital of capacity 200 – 300patients daily. We are projecting an
incinerator of approx. 50Kg/hr.
