Diesel operated Constructed with heavy duty material incinerator

Combustion efficiency of >99.0%
Suitably designed pollution/emission control devices such as scrubbers,filters or electrostatic precipitator installed/retrofitted
Double chambers, with combustion retention/ residency time of at least two seconds in the second chamber
Feed rate/load capacity of >1000kg and /or  volume >1.5m
Burn rate >300kg/hour
 
Attaining high temperature >1200C
Quick heat up times
Consttant run fan
Diesel operated, with fuel consumption of >12litres/hour
Fitted with temperature controller/Monitor and thermostat control
Constructed with heavy duty material(e.g. anodished stell) with highly durable refractory  cement lining (10cm or higher width preferable )
High burn rates of at least 500kg per hour
Currently we are working to provide turnkey solutions to 50 bed  hospital and would like to have your recommendation for incinerator that can effectively handle the 
load of 50 bed  hospital.
I require an incinerator which is capable of burning between 3 to 5 tonnes per day of mixed waste products, plastics, rubber, flammable putrescible waste, medical waste, 
rubber tyres, paper and cardboard, textiles, green timber waste etc. As some of the waste products will contain non-flammable solids, the incinerator should be capable of extracting those materials probably via a rotary kiln process. We are however  open to suggestions on the issue of 
the rotary kiln solution as you may have other solutions available.
It is not intended to use any fuel, such as oil or diesel, to promote the burning of the waste, as the waste products are required to be incinerated using a free burning process. 
Hot air however from a downstream process will be available to increase the incinerator temperature and burning rate as required. Very high temperatures in the incinerator 
are not necessary and are not required.